manualshive.com logo in svg

Ametek VERSITRON BT130R, Operation Manual, Page: 81 / 82

Share
Download
Ametek VERSITRON BT130R Operation Manual Download Page 81

Versitron Operation Manual 

81 

 

ONE YEAR LIMITED WARRANTY 

Should Newage Testing Instruments, Inc. equipment require service, we will repair or 

replace, at our option, any part or product which upon examination by a Newage service 

technician, shows to be defective in material or workmanship. 

Excluded from this warranty are any parts that are to be replaced as part of normal product 

operation, such as indenters, test blocks, and indenter shrouds. 

This warranty is extended to the original purchaser only, for a period of one year (12 

months) from owner’s date of purchase. 

This warranty IS NOT VALID IF THE INSTRUMENT HAS BEEN MODIFIED, MISUSED 

OR DAMAGED in any way.  This includes damage caused by disassembly by any person 

other than an authorized Newage Testing Instruments’ service technician. 

Please read all operating instructions according to the manual supplied with  the 

instrument prior to operation.  This warranty applies only to instruments sold by Newage 

Testing Instruments, Inc. and its authorized distributors. 

Newage Testing Instruments, Inc. is not responsible in any way for losses, damage, or 

other form of consequential damage resulting from equipment failure or improper use. 

IMPORTANT: Register your instrument with Newage Testing Instruments, Inc. service 

department by filling out and returning the enclosed warranty registration card 

 

 

 

Summary of Contents for VERSITRON BT130R



















































































Reviews:

No comments