Ametek UPLC CU44-VER04, Applications Manual

Page: 80 / 129

Page 5–2
UPLC™ Application Manual
<voice> 1 </voice>
<ptt_delay1> 2 </ptt_delay>
<trip_hold1> 0 </trip_hold1>
<guard_hold1> 0 </guard_hold1>
<ptt_delay2> 30 </ptt_delay2>
<trip_hold2> 35 </trip_hold2>
<guard_hold2> 40 </guard_hold2>
<unblock_time1> 0 </unblock_time1>
<unblock_delay1> 0 </unblock_delay1>
<ttu0> 2 </ttu0>
<guard_t0> 2 </guard_t0>
</logset>
<ioset>
<inputs>
<in1_hold> 0 </in1_hold>
<in1_selection> 1 </in1_selection>
<in1_active_state> 0 </in1_active_state>
<in2_hold> 0 </in2_hold>
<in2_selection> 2 </in2_selection>
<in2_active_state> 0 </in2_active_state>
<in3_hold> 0 </in3_hold>
<in3_selection> 0 </in3_selection>
<in3_active_state> 0 </in3_active_state>
<in4_hold> 0 </in4_hold>
<in4_selection> 0 </in4_selection>
<in4_active_state> 0 </in4_active_state>
<in5_hold> 0 </in5_hold>
<in5_selection> 0 </in5_selection>
<in5_active_state> 0 </in5_active_state>
</inputs>
<tdoutputs>
<em1_selection> 0 </em1_selection>
<em2_selection> 0 </em2_selection>
<em3_selection> 0 </em3_selection>
<em4_selection> 0 </em4_selection>
</tdoutputs>
<lloutputs>
<prog1_selection> 1 </prog1_selection>
<prog1_active> 0 </prog1_active>
<prog1_action> 0 </prog1_action>
<prog2_selection> 2 </prog2_selection>
<prog2_active> 0 </prog2_active>
<prog2_action> 0 </prog2_action>
<prog3_selection> 6 </prog3_selection>
<prog3_active> 0 </prog3_active>
<prog3_action> 0 </prog3_action>
<prog4_selection> 7 </prog4_selection>
<prog4_active> 0 </prog4_active>
<prog4_action> 0 </prog4_action>
<prog5_selection> 0 </prog5_selection>
<prog5_active> 0 </prog5_active>
<prog5_action> 0 </prog5_action>
<prog6_selection> 10 </prog6_selection>
<prog6_active> 0 </prog6_active>
<prog6_action> 0 </prog6_action>
<prog7_selection> 4 </prog7_selection>
<prog7_active> 0 </prog7_active>
<prog7_action> 0 </prog7_action>
<prog8_selection> 0 </prog8_selection>
<prog8_action> 0 </prog8_action>
<prog9_selection> 0 </prog9_selection>
<prog9_action> 0 </prog9_action>
<prog10_selection> 12 </prog10_selection>
<prog10_action> 0 </prog10_action>
</lloutputs>
</ioset>
</UPLC>
Configuration File Modification
General Settings
System Identification
<id_line0>System Identification Line
1</id_line0>
<id_line1>System Identification Line II
</id_line1>
These two lines are 40 characters free form text.
You are free to enter any text here to identify the
system.
Channel
<chan_type>1</chan_type>
This indicates the channel type and is a single digit
value.
0 - Configures the system to operate in AM or
otherwise called ON/OFF mode
1 - Configures the system for operation in FSK
Mode
Function
<functn>1</functn>
Function allows you to choose the function type.
This is a number between 0 & 3 depending on the
choice of mode.