background image

Warnings and Cautions

Caution:

 In order to insure that correct operation of the 

r

2

i300

 instrument is maintained, any 

repair or service must be performed by experienced personnel that are trained by Reichert Inc.

Caution ESDS:

 The internal circuitry of the 

r

2

i300

 contains electrostatic discharge sensitive 

devices (ESDS). Such components may be sensitive to high voltages produced by static 

discharge.

Caution:

 Do not use strong solvents or strong cleaning solutions on any part of the 

r

2

i300

 or 

damage to the unit may occur. 

Warning:

 Do not remove or defeat the earth ground connection on the 

r

2

i300

 power input 

connector or the unit’s power cord. Damage to the 

r

2

i300

 instrument and/or injury to the 

operator may occur.

Warning:

 The 

r

2

i300

 should be used in strict accordance with the instructions outlined in 

this users guide. The safety of the operator and the performance of the instrument cannot be 

guaranteed if used in a manner not specified by Reichert Inc. 

SN

[REF]

Symbol Information

 

The following symbols may appear on the instrument.

 

 

CAUTION: Risk of Electrical Shock

 

 

CAUTION: Indicates that important operating and maintenance instructions are  

 

 

included in this user guide

 

 

CAUTION: Replace with the same type and rating fuse

 

 

Date of Manufacture

 

 

Waste of Electrical and Electronic Equipment

 

 

Serial Number

 

 

Catalog Number

 

 

Ground

 

 

On - Off

 

 

Conformity with mandatory European safety requirements

2

Summary of Contents for Reichert r2i300

















Reviews: