Ametek MP3 SCR DeviceNet Head, Hdr Hmi Manual

Page: 54 / 72

47
*0 = Energize on ActiveState (normal)
1 = Energize on Non-Active State
(as long as unit is powered)
* = default selection
3.12.9 Main Menu >> Service-Parameter Configuration Menu >> Dnet Interface
These parameters are used to determine what values are placed in DeviceNet Input
Assemblies. Each is configured with a parameter number. The value contained in the
specified parameter is the value placed in the assembly. The assembly you select
using
Input Assembly will determine how many of these are used. The needed values
are application specific and the default values are arbitrary. While voltage, current,
and power are the most used values, you may choose to use percentage value or
engineering value parameters, or any others.
Please refer to MP3 DCR DeviceNet Head manual sections 4.11, 6.11 and Appendix
B for more information.