Ametek mocon Dansensor LeakPointer H2O, User Manual

Page: 18 / 36

16 User Guide EN Dansensor
®
LeakPointer H
2
O
P/N 390225-C
11/2021
Package testing
1. Ensure that the right amount of water has been filled into the tub see "Filling of water" on
page 12 .
2. Place the test sample

in the water.
3. Start test and if necessary adjust the vacuum as described in "Operation and adjustment of
chamber vacuum" on page 15 .
4. When vacuum is stable you can inspect the sample. Air bubbles

will indicate that there
is a leak and also where the leak is located.
5. When finished, push the button

to release it. The tub ventilates and finally the lid

opens.
6. Now you are ready to test another sample.
7"$
7"
$