100975
05 11-06-2001
23/32
8.5 Measurements, cont.
Datalog:
This menu picks up the measurements and stores them in an user specified file (with the
extension DLO).
WARNING :
When using an already existing file name, this file will be subjected to
overwriting (destroyed).
It is possible to specify the resolution of the data in the logfile which is changed by pressing
<SPACE>. Specify time (HH.MM.SS) and date (DD.MM.YY) for start and end and the time
between the measurements. The specified end time has to be later than the start time in
order to create the file.
Log file data
Filename
: example .DLO
Resolution in temperature mode
: 0.001
Use <Space> to change mode
Start time
: 12.00.00
End time
: 12.01.18
Start date
: 30-06-94
End date
: 30-06-94
Time between log
:
1 seconds
< ESC > aborts
The measuring starts when TIME BETWEEN LOG has been entered.
Logging to file
Status
:
Log file is being created
Measured
Sensor 1
:
23.651
°
C
Measured
Sensor 2
:
23.599
°
C
Start/Current time
:
12.00.01
The program pop-up a message when the logging is over.
NOTICE:
If the logging of data is started after the time indicated, the time stated in the log
file is not going to indicate the actual starting time.
The contents of the file can be selected in the display logdata menu, which can be shown on
the screen or printed out to a printer. The contents and format will be the same no matter if
file, screen or printed paper is selected.
