17
502-3000 Series Ztron
TM
Point Level Control
Installation
2.6 Wiring the
Sensing Element
(Remote)
If the Ztron electronic unit is mounted remotely from the
sensing element, the cable connections from the sensing
element to the electronic unit are made to the individual
terminals on the side opposite the terminal strips. See
Figure 2-13.
NOTE
It is important that the sensing element
cable is mechanically separated from the
power wiring.
When installing remote-mount electronics, you must use the
Drexelbrook supplied coaxial cable. See Figure 2-14. The
cable can be a maximum of 25 feet (7.62 meters). Termination
kits are available to shorten the cable if necessary.
Figure 2-13
Sensing Element Wiring
Remote Mount
