Page 11
Millwatch/Silowatch
Single Stream
User Guide
8 Installing the Antifreeze Line
Only two of the pipes in the antifreeze line are used. Make sure you identify
these AT BOTH ENDS of the line.
The power supply connects to the circuit breaker INSIDE the Mill/Silo Fire
Detector.
A
Signal Cables (black, red, brown) use to connect blowback solenoid valve
B
Sample and calibration gas lines (one is not used) identify lines at both ends
C
Power Supply (brown, blue, green/yellow)
D
Thermocouple NOT USED (make safe)
E Nut
F Washer
Part Nº
Description
323.512
Antifreeze sample line 230 V
323.513
Antifreeze sample line 110 V
Alternative sample line designs are used in the USA.
