9
098-0003 Rev. B
2.4
ENDOTOXIN FILTER
1.
Locate and install the Endotoxin-Retentive Filter assembly on or near the wall.
2.
Connect
the 1” pump discharge hose to inlet valve on the endotoxin filter assembly.
(Figure 2.5)
3.0 SYSTEM START-UP
WARNING: This Reverse Osmosis System (RO) contains a preservative solution to
prevent microbiological growth and freezing. Discard all product water for
at least two hours of operation before placing the RO in service.
NOTE: As each component is started and flushed of any debris, make sure to divert
loop water to the drain to flush loop of any debris as well.
For 00SRO1095 RO, refer to Manual 98-0150
For 00MW200 Silex Wall Mount Deionizer, refer to Manual 98-0160
For 0185-8000 Healthcare Storage Tank, refer to Manual 098-0001
For 0021003 Loop Endotoxin Filter, refer to Manual 98-0033
