AmeriWater CW130 Series, Operation & Installation Manual

Page: 11 / 51

8 6/07
AmeriWater if media loss is suspected. All loses must be verified by authorized factory
representative.
NOTE: For multi-vessel systems be sure that each vessel has the same number of media
containers per layer and same number of layers.
b) b. Remove top filter vessel closure.
NOTE: Fill vessel 1/3 full with water to cover under drain before adding media. This
will help to level the media, expel air, and reduce dust exposure.
c) c. Add media in the order as indicated on media container label. (Ref: ML)
NOTE: To avoid displacement of water in multi vessel systems, follow this example.
Example: Add layer #1 to all vessels, then add layer #2 to all vessels, and continue until
all media has been added to all vessels. Level each layer before adding next layer.
d) d. Fill vessel(s) to top with water.
e) e. Replace and secure vessel gasket and closure.
NOTICE:
Contact AmeriWater at 800.855.5535 to arrange for factory authorized technician to do
startup and training.
TWO WEEKS ADVANCE NOTICE IS REQUIRED.
START UP BY UNAUTHORIZED PERSON MAY VOID WARRANTY!