9
SETPOINT SETTING
PUMP IN CONTROLLED-OPERATION MODE
The figure below represents the pump in controlled-operation mode
(pressure control).
The light fields 5 and 6 are activated, indicating a desired setpoint
of 3 bar. The setting range is equal to the sensor measuring range
(see sensor nameplate).
Setpoint set to 3 bar, pressure-control mode
The buttons on the pump control panel will toggle the pressure up or down
at 14.5 PSI increments. The gauge positioned by the sensor on the
variable speed unit, shows the discharge pressure of the pump.
Summary of Contents for CHIE VARIABLE SPEED BOOSTER PUMP SYSTEM
Page 6: ...4 SYSTEM DESIGN DRAWING...
Page 13: ...11 REPLACEMENT PARTS DRAWING...
