3.
Position top and bottom tracks parallel to each other. Allow sufficient space to layout uprights between and per-
pendicular to tracks (see Figure 3). Ensure correct orientation of each upright. Slide uprights into top track and
align with pre-drilled holes. Attach with frame bolts (E1), flat washers (J), and frame nuts (H). Finger tighten.
Bring bottom track over bottom of uprights and align with pre-drilled holes. Attach with frame bolts (E1), flat
washers (J), and frame nuts (H). Finger tighten.
4.
Figure 3
For gate openings greater than 24 feet, top & bottom enclosed tracks are required to be spliced. Align short left
track (UL) to long right track (UR) and insert splice block as shown in Figure 2A. Line up pre-drilled holes,
attach with frame bolts (E1), splice bolts (E2), flat washers/lock washers (J), and frame nuts (H). Tighten all
nuts thoroughly. Align long left track (LL) to short right track (LR) and insert splice block as shown in Figure
2B. Line up pre-drilled holes, attach with frame bolts (E1), splice bolts (E2), flat washers/lock washers (J), and
frame nuts (H). Tighten all nuts thoroughly.
Figure 2A
Figure 2B
Note: Frame bolts (E1) are used along the side of the track in conjunction with flat washer, lock washer (J) & frame nut (H) assembly.
FLAT WASHER
LOCK WASHER
E1
Lock Washer (J)
E2
Flat Washer
TO
P
“TOP” inserts into tracks
marked “UL & “UR”
UL
UL
Bottom Guide Track
Gates < 24’ opgs
Top & Bottom Enclosed Track
Gates > 24’ opgs
Top Enclosed Track
All Gates
UL
LR
LL
LR
A
4
4
PART # TP-II INST | 07/2018
AMERISTARFENCE.COM
|
888-333-3422
