8
INSTALLATION EQUIPMENT
•
Safety Goggles and Rigger Gloves
•
Spirit level, tape measure
•
Drill bits:
- 8mm masonary drill bits (for drilling into brick, stone, concrete, etc)
- No 3 Screwdriver bit and extension bar for drill to use on footplate screws
•
Combination Spanners / Sockets
- 13mm & 17mm Combination Wrenches
- 13mm Socket with Ratchet
- 17mm socket & 4mm allen key bit
•
One set of metric Allen Keys
•
Hammer
•
Screwdrivers:
- #1 Phillips
- #2 Phillips
- Terminal screwdriver
•
Anti-static wrist strap
•
Wire strippers
•
Crimping Tool
•
Electrical or Combination pliers and Electrical side cutters
•
Digital multi-meter/clamp meter
(capable of measuring DC currents of up to 30A for at least 5 seconds)
•
Electric drill
(varispeed with hammer/non-hammer action), (either mains-powered or 24V cordless)
To perform a typical installation you will need to use the following types of equipment:
