11 //
24
P/N: 630-00047 RevB 11519
Hercules II 600 Vertical Platform Lift Install Manual | www.Ameriglide.com | 866-378-6648
INSTALLING THE RAMP
Step 1: Install the ramp roller guide on the side of the lift tower using the screws
already installed in the panels.
NOTE: The longer flange will point toward the floor.
Step 2: Attach the two ramp pivot tabs to the lower landing
sides of the platform. Reinsert the hex bolts, one of which will
go through the guard panel post, and tighten.
Step 3: Attach the ramp to the pivot tabs using shoulder
bolts and locking nuts. Tighten the nuts until they seat
against the bolt shoulder.
Step 4: Attach the ramp roller arm by bolting it to the
underside of the ramp. The ramp roller should align and make
contact with the ramp roller guide. The roller should ride up
the tower arm, folding the ramp when the platform is raised.
INSTALLING RAMP
Summary of Contents for AMGHERC600-4
Page 24: ...P N 630 00047 RevB 11519 ...
