Americana Outdoors, Inc.
13
Cherokee Installation Guide
STEP 9
Position peak cap
(H)
over projection fascias
(E)
at
the peak of the structure. Attach using (4) #8 x
1/2”
screws
(AA)
.
STEP 10
If optional downspout kit was received with your order,
you may not have received scupper
(I)
. Follow the
separate downspout assembly instructions attached.
Determine the desired location to drain water from
gutter
(D)
. Cut a hole no bigger than
2”
diameter in
the bottom of the gutter. Alternatively, drill several
small holes in a rectangular pattern no bigger than
2”
x
3”.
Apply a generous bead of caulk around the top
flange of scupper
(I)
. Attach the scupper to
gutter
(D)
using (2) #8 x
1/2”
screws
(AA)
.
Repeat for any remaining scuppers
(I)
.
9
10
ASSEMBLY COMPLETED
•
Touch up paint has been supplied with the shelter to cover minor scratches or bolt and screw
heads. Use a template to achieve a good finish and minimize over
-
spray.
•
Be sure to sweep or brush all metal shavings off the shelter and leave the shelter in a clean
condition to help prevent the rusting or staining of the surface finish.
