manualshive.com logo in svg

American Standard Schlage Link AZEMT500BB32MAA, Installation And User Instructions Manual

Share
Download
American Standard Schlage Link AZEMT500BB32MAA Installation And User Instructions Manual Download Page 5

5

Gas Furnace or Air Handler 

Fan  G

Heat Stage 1  W1

Compressor Stage 1  

Y

LO

24VAC  Return  R

  24VAC Common  B/C

Compressor Stage 2 

  Y

BK

Heat Stage 2  W2 

RED

GREEN

WHITE

YELLOW 

BLUE

BROWN

Remote Temperature Sensor Connections and Operation: 

Indoor sensor connected to RS1.  Replaces internal sensor.  RS2 not connected.

Indoor sensor connected to RS2.  Averages temperature with internal sensor.  RS1 not connected.

Indoor sensors connected to RS1 and RS2.  Averages RS1 and RS2 sensor temperatures.  

     Internal sensor is not used.

Outdoor sensor connected to RS2.  Reports outdoor temperature to comfort control.

Indoor sensor connected to RS1 and outdoor sensor connected to RS2.  RS1 replaces the internal 

     sensor.  RS2 reports the outdoor temperature to comfort control.

Outdoor Unit

Compressor Stage 1  Y1

24VAC  Return  R

  24VAC Common  B

Compressor Stage 2  Y2 

ORANGE

JP1: Internal RC to 

RH jumper

O

W1 HEAT

 24RC 

24RH

G Fan

W2/O

Y1 Comp

Y2 Comp

 24C 

RS1

RS1

Sensor Shield

Sensor Shield

H1

HC

RS2

RS2

Thermostat Connection 

Remote

Sensor 1 

Remote

Sensor 2                  

System Type B - 2 Stage Variable Speed Gas Furnace or Variable Speed Air Handler with 2 Step Cooling 

Note 1 - Field  installed jumper from R to O.

(Note 1)

(Note 7)

(Note 2)

(Note 5)

Note 2 - Cut/remove R to BK jumper

Note 3 - For non-communicating variable speed air handler.

              (For communicating air handler, use system type A diagram.)

(Note 3, Note 4)

Note 4 - For 2 Step Cooling, outdoor unit contains one 2 stage scroll compressor

Note 5 - JP1 is an internal RC to RH jumper

Note 6 - Remote sensor wiring is not polarized.

Note 7 - May be W or W1.  For systems with more than one W terminal,

              a field installed jumper is required for W1 to W2 and W3.

Air Handler or Gas Furnace

Fan  G

Heat Stage 1  W1

Compressor Stage 1  Y1

24VAC  Return  R

  24VAC Common  B/C

Compressor Stage 2  Y2

BK

RED

GREEN

WHITE

YELLOW 

BLUE

BROWN

Remote Temperature Sensor Connections and Operation: 

Indoor sensor connected to RS1.  Replaces internal sensor.  RS2 not connected.

Indoor sensor connected to RS2.  Averages temperature with internal sensor.  RS1 not connected.

Indoor sensors connected to RS1 and RS2.  Averages RS1 and RS2 sensor temperatures.  

     Internal sensor is not used.

Outdoor sensor connected to RS2.  Reports outdoor temperature to comfort control.

Indoor sensor connected to RS1 and outdoor sensor connected to RS2.  RS1 replaces the internal 

     sensor.  RS2 reports the outdoor temperature to comfort control.

Outdoor Unit

Compressor Stage 1  Y1

24VAC  Return  R

  24VAC Common  B

Compressor Stage 2  Y2 

ORANGE

JP1: Internal RC to 

RH jumper

O

W1 HEAT

 24RC 

24RH

G Fan

W2/O

Y1 Comp

Y2 Comp

 24C 

RS1

RS1

Sensor Shield

Sensor Shield

H1

HC

RS2

RS2

Thermostat Connection 

Remote

Sensor 1 

Remote

Sensor 2                  

Note 8 - Remote sensor wiring is not polarized.

Note 9 - For heat pumps matched with furnace, dual fuel must be enabled in the 

             “Mechanical Settings” menu.  BAYSEN01ATEMPA required for “restricted”

              mode of operation.  See “Remote Temperature Sensor Installation”.

System Type C - PSC, CTM, Variable Speed, or 24 Volt Communicating Air Handler or gas furnace with 1 or 2 Stage/Step Heat Pump

Note 1 - May be W or W1.

  For systems with more than one W terminal,

              a field installed jumper may be required for W1 to W2 and W3. 

(Note 1)

(Note 2)

(Note 3)

(Note 4, Note 5, Note 6, Note 7, Note 9)            

Note 2 - May be Y, Y1, or Y

LO

Note 3 - May be Y or Y2

Note 4 - Applies to 2 step heat pumps matched with communicating air handler or furnace only.

              All other variable speed air handlers use system type D diagram.

Note 5 - For 2 Stage, outdoor unit contains two compressors

Note 6 - For 2 Step, outdoor unit contains one 2 stage scroll compressor

Note 7 - PSC CTM air handler or gas furnace for single stage heat pump only

(Note 8)

(Note 8)

X2

O

Summary of Contents for Schlage Link AZEMT500BB32MAA





























Reviews:

No comments

Brands by name

Popular brands

Load more brands