12
16
Test All Modes of Operation
Fan, Cooling, and Heating.
Perform System Checkout
15
Optional Remote Temperature Sensors Installation
Remote sensor input RS2 can be configured for use as indoor or outdoor temperature sensing. An outdoor temperature sensor is
required for Dual Fuel Restricted mode. The factory default setting for RS2 is “IN” for use with remote indoor temperature sensing and/or
averaging. To configure RS2 to sense outdoor temperature, complete the following steps:
a. Press the MENU button twice to access the Menu Selection screen.
b. From the Menu Selection screen, press and hold the two inner buttons down for 4 seconds to reach the Installer Settings menu.
c. From the Installer Settings screen, scroll down to Remote Sensors using the Scroll down button and press the Select button.
d. From the Remote Sensors screen, select the option for RS2 remote senor location. (IN is the factory default setting)
e. To change RS2 for use as an outdoor temperature sensor, press the + button to change this setting to OUT.
f.
Press the Done button three times to return to the home screen.
Remote Sensors
RS2 Location IN
DONE
+
-
Press DONE button
to exit back to installer
settings screen.
Press the +/- buttons to change the setting.
