American Standard ACONT900AC43UA, Installer'S Manual

Page: 14 / 24

ACONT900AC43UA
Pub. No. 11-HD04D1-2
69-2080—05 14
Minimum
Compressor On Time 0630 3 0 - 15 Minimum number of
minutes compressor is on.
Clock Format 0640 12 12, 24 12 - 12-hour clock format
24 - 24-hour clock format
Extended Fan On
Time Heat 0650 0 0, 30, 60,
90 or 120 Fan operation is extended
0, 30, 60, 90 or 120
seconds after call for heat
ends. Only shown for nonvariable
speed indoor units.
Compressor Heat
Blower Off Delay
Profile 0651 5 0 - 5 0 - Disabled
1 - 0.5 min @ 35%
2 - 0.5 min @ 50%
3 - 1.5 min @ 50%
4 - 0.75 min @ 100%
5 - 1.5 min @ 100% Only shown for variable
speed indoor units.
Extended Fan on
time control 0660 90 0, 30, 60,
90 or 120 Fan operation is extended
0, 30, 60, 90 or 120
seconds after call for cool
ends. Only shown for nonvariable
speed indoor units.
Compressor Cool
Blower Off Delay
Profile 0661 5 0 - 5 0 - Disabled
1 - 0.5 min @ 35%
2 - 0.5 min @ 50%
3 - 1.5 min @ 50%
4 - 0.75 min @ 100%
5 - 1.5 min @ 100% Only shown for variable
speed indoor units.
Compressor Heat
Fan On Delay Profile 0665 0 0, 1, 5,
10, 20,
30 0 - Disabled
1 - Enabled - 50% for 1
minute (V.S. only)
5 - 5 seconds
10 - 10 seconds
20 - 20 seconds
30 - 30 seconds For Variable Speed indoor
units: choices are 0 and 1.
For Non-variable Speed
indoor units: choices are 0,
5, 10, 20, and 30.
Compressor Cool
Fan On Delay Profile 0667 0 0, 1, 5,
10, 20,
30 0 - Disabled
1 - Enabled - 50% for 1
minute (V.S. only)
5 - 5 seconds
10 - 10 seconds
20 - 20 seconds
30 - 30 seconds For Variable Speed indoor
units: choices are 0 and 1.
For Non-variable Speed
indoor units: choices are 0,
5, 10, 20, and 30.
Keypad Lockout 0670 0 0, 1, 2 0 - Unlocked keypad
1 - Partially locked keypad
2 - Fully locked keypad Unlocked - all functions are
available.
Partially locked - only
temperature up and down
keys and ability to enter and
modify installer setup mode
are available.
Fully locked - only ability to
enter and modify installer
setup mode are available.
Temperature Control
in Heat 0680 2 1, 2, 3 1 - Less aggressive
temperature control (could
cause temperature
undershoot)
2 - Standard temperature
control in heating
3 - More aggressive
temperature control (could
cause temperature
overshoot) Applies to recovery ramp
and use of auxiliary heat
during recovery.
Table 4. Installer Setup Menu
Selection
Installer Setup
Number (ISU)
Factory
Setting
Choices
Comments Option Description