manualshive.com logo in svg

American Megatrends 87 Series, User Manual

The American Megatrends 87 Series is a cutting-edge product that offers advanced features and capabilities. To make the most of this powerful device, users can easily access the User Manual by visiting our website and downloading it for free. Unlock the full potential of your American Megatrends 87 Series with our comprehensive manual.

Share
Download
background image

© Copyright 1994 American Megatrends, Inc.
All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced, transcribed,
stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without the prior written
consent of the publisher, American Megatrends, Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is only obligated to replace or refund the purchase price of
this product at American Megatrend's discretion according to the terms and conditions of the warranty card accompanying the Enterprise-IV
motherboard. American Megatrends shall not be liable in tort or contract for any loss or damage, direct, incidental or consequential. Please see
the Warranty Registration Card shipped with this product for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct, indirect,
incidental, or consequential, arising from the design or use of this product or the support materials provided with the product.

Trademarks

American Megatrends acknowledges the following trademarks:

Intel is a registered trademark of Intel Corporation.
MS-DOS, Xenix, and Microsoft are registered trademarks of Microsoft Corporation. Microsoft Windows and Windows NT are trademarks of Microsoft Corporation.
IBM, AT, PS/2, VGA, OS/2, and EGA are registered trademarks of International Business Machines Corporation. XT and CGA are trademarks of International Business Machines Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Motorola is a registered trademark of Motorola Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Samsung is a registered trademark of Samsung Electronics Corporation.
Siemens is a trademark of Siemens Corporation.
Mitsubishi is a registered trademark of Mitsubishi Electronics of America.
Unix is a registered trademark of American Telephone and Telegraph Company Bell Laboratories.
Weitek is a trademark of Weitek, Inc.
Toshiba is a registered trademark of Kabushiki Kaisha Toshiba.

Revision History

6/8/93

Initial release.

10/6/93

Add new AMIBIOS Setup options.

9/8/94

Added information from errata sheets.

Summary of Contents for 87 Series


























































































































Reviews:

No comments

Related manuals for 87 Series

ASROCK 870 Extreme3 R2.0 Installation Manual preview
870 Extreme3 R2.0
Brand: ASROCK Pages: 17
ASROCK N68C-S Specifications preview
N68C-S
Brand: ASROCK Pages: 5
Portwell ROBO-8713SGA User Manual preview
ROBO-8713SGA
Brand: Portwell Pages: 86
C&T Solution CT-DWL01 User Manual preview
CT-DWL01
Brand: C&T Solution Pages: 84
Nematron AEMQ77-989 User Manual preview
AEMQ77-989
Brand: Nematron Pages: 47
FAAC Digiprogam Quick Start Manual preview
Digiprogam
Brand: FAAC Pages: 8
Texas Instruments ADS1282EVM User Manual preview
ADS1282EVM
Brand: Texas Instruments Pages: 38
JETWAY NF694L Series User Manual preview
NF694L Series
Brand: JETWAY Pages: 52
Shuttle FB81 Manual preview
FB81
Brand: Shuttle Pages: 81
Torqeedo BaseTravel 401 S Operating Manual preview
BaseTravel 401 S
Brand: Torqeedo Pages: 32
Ublox EVK-ANNA-B4 User Manual preview
EVK-ANNA-B4
Brand: Ublox Pages: 42
ASROCK X299 Taichi Manual preview
X299 Taichi
Brand: ASROCK Pages: 200
DFI CA100-D User Manual preview
CA100-D
Brand: DFI Pages: 115
MSI MICRO NLX BX4 User Manual preview
MICRO NLX BX4
Brand: MSI Pages: 91
Gigabyte GA-H61N-USB3 User Manual preview
GA-H61N-USB3
Brand: Gigabyte Pages: 88
ASROCK P67 PROFESSIONAL Datasheet preview
P67 PROFESSIONAL
Brand: ASROCK Pages: 9
Intel BLKDH61WWB3 Technical Product Specification preview
BLKDH61WWB3
Brand: Intel Pages: 86
Humandata ZKB-078KIT User Manual preview
ZKB-078KIT
Brand: Humandata Pages: 6

Brands by name

Popular brands

Load more brands