American Megatrends 16 Series, User Manual

Page: 98 / 128

Appendix A - 32-bit Memory Card
90
Installing the 32-bit Memory Card
Step Action
1 The memory card has two edge connectors: The 64-pin connector
plugs into J20 and the 132-pin connector into J21 on the
motherboard.
2 The card has a guide on one end. Hold the board firmly and gently
press down until the card is in the slot. Install a screw in the card
guide.
3 Turn the power on.
4 Make sure the total amount of memory on the configuration screen
is correct. See the table below. If incorrect, make sure the SIMMs
are seated properly.
Memory Configurations
This table shows the total memory for all
memory combinations. BANK 1 and 2 are on
the motherboard. BANK3, 4, 5, and 6 on the
memory card.
Bank1 Bank2 Bank3 Bank4 Bank5 Bank6 Total
RAM
1 MB 1 MB 1 MB -- -- -- 12 MB
1 MB 1 MB 1 MB 1 MB -- -- 16 MB
1 MB 1 MB 1 MB 1 MB 1 MB -- 20 MB
1 MB 1 MB 1 MB 1 MB 1 MB 1 MB 24 MB
1 MB 1 MB 4 MB -- -- -- 24 MB
1 MB 1 MB 4 MB 4 MB -- -- 40 MB
1 MB 1 MB 4 MB 4 MB 4 MB -- 56 MB
1 MB 1 MB 4 MB 4 MB 4 MB 4 MB 72 MB
4 MB 4 MB 1 MB -- -- -- 36 MB
4 MB 4 MB 1 MB 1 MB -- -- 40 MB
4 MB 4 MB 1 MB 1 MB 1 MB -- 44 MB
4 MB 4 MB 1 MB 1 MB 1 MB 1 MB 48 MB
4 MB 4 MB 4 MB -- -- -- 48 MB
4 MB 4 MB 4 MB 4 MB -- -- 64 MB
4 MB 4 MB 4 MB 4 MB 4 MB -- 80 MB
4 MB 4 MB 4 MB 4 MB 4 MB 4 MB 96 MB