American Megatrends 16 Series, User Manual

Page: 96 / 128

Appendix A - 32-bit Memory Card
88
Appendix A
32-Bit Enterprise-II Memory
Card
The 80486 Enterprise-II motherboard
supports up to 32 MB of SIMMs on the
motherboard. You can install the Series 19
32-bit Memory Card to increase 32-bit
memory. All SIMM banks on the motherboard
must be filled before installing a 32-bit
Memory Card.
Unpacking the Memory Card
Follow the same procedures outlined on
page 9 when unpacking the Series 19 Memory
Card.
Memory Card Features
The 32-bit Memory Card plugs into the 32-
bit slot on the motherboard labeled J20
and J21. The Memory Card has a capacity of
64 MB and uses 1 MB or 4 MB x 9 SIMMs. It
has four 32-bit memory banks with four
sockets each. Use as many banks as you
wish. All banks must use the same SIMM
type. When upgrading memory on the Memory
Card, you must fill an entire bank. The
new SIMMs must be the same type as the
previously installed SIMMs. For example,
if Bank3 is populated with four 1 MB x 9
SIMMs, each of the remaining banks must be
upgraded with four 1 MB x 9 SIMMs.