Model 152 Smart Card Reader/Writer Operation Instructions
8182760 Revision G Copyright Axiohm 1998 All Rights Reserved
Page 1.1
Chapter 1:
Introduction
This booklet describes the requirements, operation, and usage of the Model 152 Smart Card
Reader/Writer (the “reader”). This booklet should be read and understood prior to initial
operation of the reader.
Appearance
The Model 152 is a manually operated insert reader for Smart Cards. The reader is contained in
an attractive plastic housing which allows easy insertion and withdrawal of smart cards. It may
be used with or without its base. The housing is suitable for desk top, cabinet top, and cabinet
side mounting.
Features
•
ISO 7816 compliant. Supports Microprocessor Cards requiring a variety of f/d ratios
(speeds). Supports a minimum speed of 1920 bps and a top speed of 38400 bps, with
various speeds in between.
•
Reads and writes Microprocessor Cards using either T=0 or T=1 protocol.*
•
RS232 compatible.
•
Reads and writes a variety of Memory Cards.
•
Capable of accessing up to 8 Secure Application Module (SAM) cards in addition to the
card in the User Connector.
•
Can use one of three communication protocols to talk with the host: AMC USI2, TLP-224,
or TLP-224Turbo.
•
Gives the host full control over the LEDs.
•
Allows the host to interrogate the device about current status and configuration information.
Accessories
•
A power supply AC/DC adaptor is available which complies with your local power
requirements.
•
Smart Card prototyping and training software for learning and demonstrating capabilities of
Smart Card technology using the Model 152.
•
Local Connector (LSAM) for a Secure Application Module (SAM), in the GSM size. This
accessory must be specified when ordering the reader, it is not field upgradable.
•
CTS for flow control. This option allows the host to block transmission from the reader. This
option must be specified when ordering the reader, it is not field upgradable.
•
External SAM boxes allowing access of up to seven additional SAM cards.
•
Axiohm - American Magnetics Division is committed to working with users to meet their
special requirements.
* Supports T=1 cards with using LRCs in the EDC field.
