PARTS REQUIRED:
FIGURE 2
8 pcs -
H2
Flat Washer
2 pcs -
P2
End Apron
8 pcs -
H5
Allen Head Bolt
2 pcs -
A2
6mm Allen Wrench
8 pcs -
H7
Phillips Round Head Screw 1 pc -
A3
4mm Allen Wrench
STEP 2:
Attach
P2
End Aprons to previous assembly
STEP 1
using
H5
Allen Head Bolts with
H2
Flat Washers as shown in
FIGURE 2
.
Do not tighten H5 Allen Head Bolts on this time.
Please make sure
P3
Playfield is flush with both ends of
P2
End Apron, tighten
H5
Allen Head Bolts using
A3
Allen
Wrench on this time.
Secure
P3
Playfield to
P2
End Apron using pre-drilled holes with
H7
Screws as shown in
FIGURE 2
.
IMPORTANT NOTE: All screws must be screwed STRAIGHT down. Tighten, but do not strip out H7 Screws.
Using
A2
Allen Wrenches to tighten
H3
Support Rod Nuts as shown in
FIGURE 2
.
P3
IMPORTANT NOTE:
Bottom of P1 Side Aprons and P2 End Aprons
must be flush with each other before tightening
H5 Allen Head Bolts.
IMPORTANT NOTE:
P3 Playfield must be flush with each
end of P2 End Aprons before
tightening H5 Allen Head Bolts.
P2
H7
H3
A2
H5
H2
H5
H2
© 2014 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
P2
A3
