American Legend FT250DS, Instruction Manual

Page: 9 / 13

STEP 5:
Slide P13 5 Player Rod, P14 3 Player Rods and P15 2 Player
Rod through Rod Bushings of one P1 Side Apron as shown
in FIGURE 5. IMPORTANT NOTE: Please note the
location of the hole that is near one end of each
rod. This is the handle end of the rod.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 5.
Place P18 Red Players ( ) on rod as shown in
FIGURE 5 .
IMPORTANT NOTE: The goalie should be at
your left and your team (player face) facing to
the right. Looking ahead to FIGURE 6, DETAIL A
and FIGURE 9 - will help you with correct player
and rod handle assembly onto rods.
Place one P17 Rod Washer, P16 Rod Bumper and
one P17 Rod Washer on each rod as shown in
FIGURE 5 .
FIGURE 5
Hole / Handle End
Rod Bushing
Note: Rod Bushings are
already attached onto
each P1 Side Apron.
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
LEFT RIGHT
P1
Side Apron
P14
3 Player Rod
P14
3 Player Rod
P13
5 Player Rod
P15
2 Player Rod
= P16 Rod Bumper
= P17 Rod Washer
= P18 Red Player
P16
P17
P18
P17
P16
P17
P17
STEP 6:
Align P18 Red Player to each player hole and attach
using H8 Bolts with H9 Lock Nut as shown in
FIGURE 6 and DETAIL A.
Attach P7 Rod End Caps to the rod as shown in
FIGURE 6.
Slide P6 Rod Handle onto each rod end with the
small hole shown in FIGURE 6.
Attach P6 Rod Handle using H10 Bolts as shown
in FIGURE 6.
P7
Rod End Cap
P7
Rod End Cap
P6
Rod Handle
P6
Rod Handle
DETAIL A
Rod
H8
H9
P18
FIGURE 6
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
Note:
Small Hole
© 2014 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED:
13 pcs - H8 Phillips Round Head Bolt 4 pcs - P7 Rod End Cap 8 pcs - P16 Rod Bumper
13 pcs - H9 Nut 1 pc - P13 5 Player Rod 16 pcs - P17 Rod Washer
4 pcs - H10 Phillips Flat Head Bolt 2 pcs - P14 3 Player Rod 13 pcs - P18 Red Player
4 pcs - P6 Rod Handle 1 pc - P15 2 Player Rod
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching
P6
Handles.
H10