PARTS REQUIRED:
12 pcs -
H6
Phillips Round Head Screw
2 pcs -
P9
Ball Catcher
2 pcs -
P10
Goal Box
2 pcs -
P11
Ball Return Tube
STEP 3:
Center
P10
Goal Box over the opening in the
P2
End Apron and attach using pre-drilled pilot holes with
H6
Screws as
shown in
FIGURE 3
.
Tighten, but do not strip out H6 Screws.
Center
P9
Ball Catcher over the opening in the
P1
Side Apron and attach using pre-drilled pilot holes with
H6
Screws
as shown in
FIGURE 3
.
Tighten, but do not strip out H6 Screws.
Make sure the round opening for
P11
Ball Return Tube is towards the floor (when table is turned upright).
Repeat for both ends of the table.
Attach
P11
Ball Return Tubes between
P9
Ball Catcher and
P10
Goal Box as shown in
FIGURE 3
.
© 2014 Escalade Sports
For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
FIGURE 3
NOTE:
Make sure the round opening
for the ball return tube is towards the
floor (when table is turned upright)
P1
P2
P10
P9
P11
H6
