manualshive.com logo in svg

AMERICAN IRONHORSE Classic SX, User Manual

Share
Download
AMERICAN IRONHORSE Classic SX User Manual Download Page 80

L I M I T E D   W A R R A N T Y

80

6-5

IMPOR

T

ANT NOTICES

In order to obtain service under this limited warranty, return your vehicle at your expense to the selling
dealer. Should a location prove difficult due to relocation, touring, or similar situations, contact AMERICAN
IRONHORSE for the name of the nearest authorized provider of service under this limited warranty. Under no
circumstance will AMERICAN IRONHORSE accept responsibility for any expenses incurred by anyone other
than the selling dealer or other authorized service provider in carrying out warranty activities under this
agreement. Such warranty activities through the selling dealer and other authorized service providers must
receive prior written approval from AMERICAN IRONHORSE. Such warranty activities will be provided by
authorized providers during normal business hours and scheduled by the provider consistent with existing
workloads and parts availability.

IMPORTANT NOTICE

AMERICAN IRONHORSE DEALERS ARE INDEPENDENTLY OWNED AND OPERATED AND AS SUCH AMERICAN
IRONHORSE IS NOT RESPONSIBLE IN ANY WAY FOR ANY PARTS, LABOR, ALTERATIONS OR MODIFICATIONS
MADE TO SAID MOTORCYCLE.

THIS WRITTEN LIMITED WARRANTY IS THE TOTAL WARRANTY PROVIDED BY AMERICAN IRONHORSE. NO
OTHER EXPRESS OR IMPLIED WARRANTIES ARE VALID.

AMERICAN IRONHORSE SHALL NOT BE LIABLE FOR ANY DAMAGES CLAIMED BY PURCHASER DUE TO LOSS
OF USE, COMMERCIAL LOSS, OR ANY OTHER CLAIMS OF LOSS DUE TO NON-NORMAL FUNCTIONING OF SAID
MOTORCYCLE.

Summary of Contents for Classic SX









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands