American Hometec AHG-T42-LP, Installation And Operation Manual

Page: 4 / 48

Page 4
SAFETY WARNINGS
DO NOT use a fuel gas that is not listed on the nameplate as compatible
with the water heater. Abnormal combustion or a deflagration may occur
which can cause a serious accident
DO NOT use the unit if the vent piping has been damaged or altered in any
way including cracking, separation, rusting, melting, etc. Improper venting
may cause a buildup of Carbon Monoxide (CO) which can cause brain
damage or death.

If the water heater needs to be installed, moved, or serviced only utilize licensed
professionals. The use of professionals ensures all work is in full compliance with
required building, plumbing and electrical codes.

Keep the area around the appliance clear and free of flammable materials such as cloth,
wood, aerosol cans, paper, gasoline, etc.

When using hot water for a shower or bath always check the water temperature before
entry to avoid being scalded. Obey local codes for the maximum water temperature setting
allowed. Water temperatures over 125
o
F (52
o
C) can cause severe burns or death from
scalds. Households with small children, disabled or elderly persons may require a setting
of 120
o
F (49
o
C) or lower.

This heater is designed only for the heating of water and should not be used for other
applications or used to heat any other media.

Never use a fuel gas that is not listed on the nameplate as compatible with the water
heater. Abnormal combustion or a deflagration may occur which can cause a serious
accident including damage to the heater.

Do not use this appliance if any part has been under water. Consult a qualified service
technician to inspect the appliance and make any required repairs prior to installation and
operation.

This water heater is designed for indoor mounting. Never mount it outdoors.

This equipment should be installed in an area where water leakage from the unit or
connections will not result in damage. The manufacturer is not responsible for any
damages resulting from leaks.

Only connect gas and water as instructed. Incorrect or reversed connections will cause
equipment damage.

Do not over tighten connections or equipment may be damaged.

Do not install in areas that are subject to vibration.