Page 12
1.
Turn off the override if it is set on another controller. Press and hold the
“Override” key to release priority. The Override indicator light will go out.
2.
Select the new controller to take control. Press and hold the “Override” key on the
wired operation panel which should have priority. The “Override” indicator will
turn on and the temperature set point may be adjusted from this controller.
Another way to gain priority is to press the “ON/OFF” key twice on the units
operation panel. The first press will shut the unit off, which will invalidate the
Override ownership of the remote, and the second press will reactivate the unit
which will reinstall factory defaults and set the unit’s panel the Override position,
the “Override” indicator will turn on. When unit is in standby, the first wired
controller to activate the unit will have priority and the Override indicator will turn
on.
Change the Temperature Set Point: First, enable “Override” or priority control for this
remote control. Adjust the temperature using the “Up” and “Down” arrows.
The temperature may be adjusted in one degree increments between 95
o
F (35
o
C) and
122
o
F (50
o
C).
Summary of Contents for AHG-T42-LP
Page 38: ...Page 38...
