INSTALLTION INSTRUCTIONS
LIGHTING AND OPERATION OF H-BURNER
FILLING H-BURNER WITH GLASS
Step 3
1.) Begin by completely covering
BURNER TUBES
(See figure 4)
with glass first.
2.) Focus first on covering the entire
BURNER TUBES
before spreading evenly within the firebox floor.
3.) Use the entire bag of glass that is provided with the
burner.
4.) Spread the remaining glass evenly on the firebox
floor without exposing
BURNER TUBES
.
WARNING: DO NOT FLAME TEST FOR LEAKS
MANUAL MATCH LIGHTING
Standard Match Lit (H
-BURNER FOR NATU-
RAL GAS ONLY)
1. Place lighted match
(See Figure 4)
on glass near inlet end of burner.
DO
NOT HOLD MATCH IN HAND!
Move
away from front of fireplace.
2. Slowly open
FIREPLACE GAS
SUPPLY VALVE
and wait for burner
to light.
3. Adjust
FIREPLACE GAS SUPPLY
VALVE
for desired flame height.
WARNING: DO NOT ALLOW FLAMES FROM H-BURNER EXCEED THE HEIGHT OF
THE FIREPLACE OPENING.
4.
SHUTDOWN:
Close
FIREPLACE GAS SUPPLY VALVE
completely.
WARNING:DO NOT LEAVE BURNER UNATTENDED, WHILE H-BURNER IS BURNING.
IMPORTANT: CHIMNEY DAMPER MUST BE WIDE OPEN
6.
Figure 4
