manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII RAS917LS, Configuration

Share
Download
American Dynamics SpeedDome Ultra VII RAS917LS Configuration Download Page 88

Supported SpeedDome Ultra VII Features 

The following SpeedDome Ultra VII Day/Night features are supported with Coaxitron and P 
protocols: 

• 

10X digital zoom (up to 230X total zoom) 

• 

85 Total Presets (1-32, 35-87)   

• 

3 Patterns 

• 

16 Areas 

• 

4 Alarm Inputs and Outputs 

• 

8 Privacy Zones 

• 

Programmable Names (camera, preset, pattern, areas, and alarms) 

• 

Open Shutter settings 

• 

IR Mode  

• 

Wide Dynamic Range (WDR) 

• 

Proportional Flip 

• 

Freeze Frame 

• 

Direction Indicator display 

• 

Multi-language Dome Configuration Utility (available in English, French, German, Italian, 
Portuguese, and Spanish) with Password Protection 

Unsupported SpeedDome Ultra VII Features 

The following SpeedDome Ultra VII features are not supported with the Pelco Coaxitron and “P” 
protocols: 

• 

Save and exit from configuration menus using 

Iris Close

 and 

Focus

 keys 

• 

Apple Peel pattern (default SpeedDome pattern) 

• 

V-Phase adjustment 

C–2 

SpeedDome Ultra VII Day/Night Operator's Manual

 

Summary of Contents for SpeedDome Ultra VII RAS917LS



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands