SENSORRAIL IIIE ADRL3TRK SERIES
8200-0593-02, REV. A
INSTALLATION GUIDE
1 of 34
SensorRail
™
IIIE
ADRL3TRK Series
SpeedDome
®
Ultra Programmable
Dome on a Rail
Installation Guide
CAUTION:
Only a certified installer is
authorized to install this equipment.
Installation by anyone else will void the
SensorRail warranty.
Contents
About this Guide ............................................................ 1
About the Product .......................................................... 1
Before You Begin........................................................... 3
Installation Steps ........................................................... 5
1. Install Threaded Rods ............................................ 5
2. Install PVC Holders ................................................ 6
3. Install Stirrups, Eyebolts, and Jointing Plates ........ 6
4. Install Rail Sections................................................ 7
5. Install Anti-Sway Cables ........................................ 8
6. Insert Copper Tracks
and Trolley Stop/Retrieval Tool.................................. 9
7. Install Optical Stop Labels.................................... 10
8. Install the PowerRail Module................................ 11
9. Install the Camera Trolley .................................... 12
10. Attach Light Reducing Sections ........................... 13
11. Clean the Rail ...................................................... 13
12. Check Electrical Connections .............................. 13
13. Configure the System .......................................... 14
14. Install the Cowling................................................ 15
15. Install End Covers................................................ 16
Ordering Parts ............................................................. 17
Specifications .............................................................. 20
Declarations................................................................. 21
Appendix A:
RF link DIP switch settings .................... 32
Appendix B:
Alternate RF antenna location ............... 32
Appendix C:
AD SensorRail Control Utility................. 33
© 2006 Sensormatic Electronics Corporation
About this Guide
This guide explains how to install the SensorRail
IIIE system. It does not explain how to:
•
Determine the exact mounting location of the
rail. This is determined by the customer’s needs
and the site’s ceiling structure.
•
Program or operate the system. See
SensorRail
IIIE User Guide
8200-0593-04 and
SpeedDome
Ultra and AD Matrix User Guides
.
•
Service the system. See Service Guide
8200-0593-03.
If you need assistance...
Contact your certified support representative.
About the Product
The SensorRail IIIE system enables a SpeedDome
Ultra dome camera to transmit video as it moves
along a rail to the ideal surveillance position.
The system consists of:
•
2.5m (8.2ft) rail sections (number determined by the
total length of the rail) with installation hardware
•
A light-reducing section at each end of the rail
•
Ceiling suspension assembly, which includes M8
threaded rods, ceiling attachment hardware (not
supplied), and mounting stirrups
•
Copper
tracks
•
Camera trolley equipped with dome camera, RF
transmit antenna, and motor
•
PowerRail module that supplies dc power to the
camera trolley, converts RS-422 data to RS-232 data
used by the trolley, and receives the video signal
from the dome camera
•
Trolley stop and retrieval tool
•
RF receive antenna.
IMPORTANT!
At least two people are required to
install this product safely and efficiently. Follow all
procedures described in this guide explicitly. If
installation difficulties occur, call:
American Dynamics Technical Services
Toll Free 800-507-6268, Option 2
International: 561-912-6259, Option 2
In Europe:
Technical Services at EMEA AD Technical Support
+800 CALL TYCO or (+800 22 55 8926)
From the UK: 08701 238 787
Direct: +31 475 352 722
