MEGAPOWER 3200 RELEASE 2.0
8200-0421-19, REV. A
RELEASE NOTES
16 of 16
Table 6, Fixed Defects continued
2189
Tours do not run correctly when pseudo numbers are different than camera numbers.
2389
EASY CPU not loading on Vista operating system.
2348
An error is intermittently displayed when trying to copy and paste monitor access to all 3200 cameras.
2389
EASY CPU not loading on Vista Ultimate.
2406
EASY CPU crashes if a camera pseudo number clashes with an existing camera number.
2407
Backing up a file causes EASY CPU to display previously saved values.
2409
Error message displayed when setting tours 7, 8, or 9.
2412
Clicking on a field can put the text cursor to the right most position so text cannot be entered.
2413
Possible to set a tours dwell time to more than 60 seconds.
2415
Event timer alarms do not disable.
Limitations
•
Sorting is disabled in the Camera Status screen to ensure that the live status information captured from
the cameras does not get corrupt.
•
Since the SensorNet/Manchester data connectors are configurable to Manchester, Manchester controlled
devices may exhibit random movement if:
- A new ADMPCPU containing different configuration with the data connectors configured to SensorNet,
or if the data connectors are manually reconfigured to SensorNet.
- Executing the command sequence 55F2 98F2 (return to factory default except port configuration) will
not reset the data connectors’ configuration to factory default to avoid Manchester controlled devices
from exhibiting random movement.
- Executing the command sequence 55F2 99F2 will rest the unit to factory default including port
configuration.
