ADC780 SERIES VANDAL-RESISTANT CAMERA
8000-2811-01, REV. C1
INSTALLATION AND SETUP GUIDE
11 of 11
Regulatory Compliance
REG ID: SV ALM-C
SV
ALM-W
SV
ALM-F
Emissions ............................... FCC part 15 Class A
CE:
EN55022
ICES-003
Immunity......................................... CE: EN55082-1
CE: EN50130-4
Safety .........................................................UL1950
CSA C22.2 No. 950
EN60950
Weather resistance:
Surface mount ................... NEMA 4, IP43
Corner mount .................... NEMA 3R, IP43
Flush mount....................... NEMA 1, IP40
Impact resistance .............. ASTM D5420-98A
FCC COMPLIANCE:
This equipment complies with Part 15
of the FCC rules for intentional radiators and Class A digital
devices when installed and used in accordance with the
instruction manual. Following these rules provides reasonable
protection against harmful interference from equipment
operated in a commercial area. This equipment should not be
installed in a residential area as it can radiate radio frequency
energy that could interfere with radio communications, a
situation the user would have to fix at their own expense.
CISPR 22 WARNING:
This is a Class A product. In a
domestic environment this product may cause radio
interference in which case the user may be required to take
adequate measures.
EQUIPMENT MODIFICATION CAUTION:
Equipment
changes or modifications not expressly approved by
Sensormatic Electronics Corporation, the party responsible for
FCC compliance, could void the user's authority to operate the
equipment and could create a hazardous condition.
Other Declarations
WARRANTY DISCLAIMER:
Sensormatic Electronics
Corporation makes no representation or warranty with respect
to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics Corporation
reserves the right to revise this publication and make changes
from time to time in the content hereof without obligation of
Sensormatic Electronics Corporation to notify any person of
such revision or changes.
LIMITED RIGHTS NOTICE:
For units of the Department
of Defense, all documentation and manuals were developed at
private expense and no part of it was developed using
Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set
forth in the definition of “limited rights” in paragraph (a) (15)
of the clause of DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United States.
TRADEMARK NOTICE:
American Dynamics, and the
American Dynamics logo are registered trademarks of
Sensormatic Electronics Corporation. Other product names (if
any) mentioned herein may be trademarks or registered
trademarks of Sensormatic or other companies.
No part of this guide may be reproduced in any form without
written permission from Sensormatic Electronics Corporation.
RLJ 02/2005
