ADJ Products, LLC - www.adj.com - WiFly Bar RGBA User Manual Page 17
ADJ Products, LLC - www.adj.com - WiFly Bar RGBA User Manual Page 18
WiFly Bar RGBA ADJ RFC Operation
The ADJ
RFC
remote
(sold seperately) has many different functions and al-
lows you to control your WiFly Bar RGBA from long distance. The ADJ
RFC
remote can control your system up to 150 ft. To use the RFC you must first
activate the fixtures receiver, to activate the receiver please see the instruc-
tions on page 10.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run an automatic program. The built-in pro-
grams will run in a continuous loop. Press the FLASH button and use the “+”
and “-” buttons to adjust the flash speed. Press the FLASH button again to
enter Fade time and use the “+” and “-” buttons to adjust the fade speed.
PROGRAM SELECTION
-
This button will activate 1 of 2 modes; Color
Select mode or Built-In Programs.
1. Press this button so that the Red LED’s flash, you are now in Color Select
mode. Use the “+” or “-” to scroll through the 15 colors. Once you have
found your color, you can press the Flash Button to activate strobing and
use the “+” or “-” to adjust the Flash rate.
2. Press this button so that the Green LED’s flash, you are now in Built-In
Program mode. Use the “+” or “-” to scroll through the built-in 22 programs.
Once you have found your desired program and you can press the SPEED
button and then use the “+” and “-” buttons to adjust the program speed.
You can press the Flash Button to activate strobing and use the “+” or “-” to
adjust the Flash rate. Press the FLASH button again to enter Fade time and
use the “+” and “-” buttons to adjust the fade speed.
FLASH
-
This button will activate the flash (strobe) effect. You can control
the flash speed by pressing the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the speed
of the Auto run and Programs.
SOUND ACTIVE -
This button activates sound active mode. Use the “+” or
“-” to adjust the sound sensitivity. Press the FLASH button to activate flash
mode and use the “+” or “-” to adjust the flash rate.
R G B W/A -
Press either one of these buttons and the press the “+” or “-”
to adjust the brightness. Press the FLASH button to activate flash mode and
use the “+” or “-” to adjust the flash rate.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the Auto
Run and Program, sound sensitivity, and color select.
WiFly Bar RGBA 4 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 STROBING
0 - 15 NOTHING
16 - 255 STROBING SLOW - FAST
6 MASTER DIMMER
0 - 255 0% - 100%
WiFly Bar RGBA 6 Channel Mode
