ADJ Products, LLC - www.adj.com - WiFLY Bar QA5 User Manual Page 17
ADJ Products, LLC - www.adj.com - WiFLY Bar QA5 User Manual Page 18
WiFLY Bar QA5 ADJ RFC Operation
The ADJ
RFC
remote
(sold seperately) has many different functions and
allows you to control your WiFly Par QA5 from long distance. The ADJ
RFC
remote can control your system up to 150 ft. To use the RFC you
must first activate the fixtures receiver, to activate the receiver please
see the instructions on page 14.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run an automatic program. Press the
FLASH button once to enter Flash mode then use the “+” and “-” but-
tons to adjust the flash rate. Press the FLASH button again to enter Fade
time adjustment use the “+” and “-” buttons to adjust the fade time.
PROGRAM SELECTION
-
This button will activate 1 of 2 modes; Color
Select mode or Built-In Programs. Each press of this button will switch
between the two modes.
1. In Color Select mode. Use the “+” or “-” to scroll through the 15 col-
ors. Once you have found your color, you can press the Flash Button to
activate strobing and use the “+” or “-” to adjust the Flash rate.
2. In Built-In Program mode. Use the “+” or “-” to scroll through the built-
in programs. Once you have found your desired program and you can
press the SPEED button and then use the “+” and “-” buttons to adjust
the program speed. You can press the Flash Button to activate strobing
and use the “+” or “-” to adjust the Flash rate. Press the FLASH button
again to enter Fade time and use the “+” and “-” buttons to adjust the
fade speed.
FLASH
-
This button will activate the flash (strobe) effect or fade time
adjustment. You can control the flash speed by pressing the “+” and “-”
buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run and Programs.
SOUND ACTIVE -
This button activates sound active mode. Use the “+”
or “-” to adjust the sound sensitivity.
R G B W/A -
Press either one of these buttons and the press the “+” or
“-” to adjust the brightness.
“+” and “-” -
Use these buttons to adjust the flash rate, fade time adjust-
ment, speed of the Auto Run and Program, sound sensitivity, and color
select.
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
5 STROBING
0 - 15 NOTHING
16 - 255 STROBING SLOW - FAST
6 MASTER DIMMER
0 - 255 0% - 100%
WiFLY Bar QA5 6 Channels - DMX Values & Functions
WiFLY Bar QA5 4 Channels - DMX Values & Functions
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 AMBER
0 - 255 0% - 100%
