background image

User Instructions

  WiFLY Bar QA5    

                                  Introduction

ADJ Products, LLC  -  www.adj.com  - WiFLY Bar QA5 User Manual Page 2

 4/13

Unpacking:

 

Thank you for purchasing the WiFLY Bar QA5 by ADJ 

Products, LLC. Every WiFLY Bar QA5 has been thoroughly tested and 

has been shipped in perfect operating condition. Carefully check the 

shipping carton for damage that may have occurred during shipping. 

If the carton appears to be damaged, carefully inspect your fixture for 

any damage and be sure all accessories necessary to operate the unit 

has arrived intact. In the case damage has been found or parts are 

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without first con-

tacting customer support. 
Introduction:

 

The WiFLY Bar QA5 is a rechargeable lithium battery 

powered, DMX intelligent, LED bar fixture with ADJ’s WiFly TransCeiver 

with wireless DMX built-in. This unit give you the freedom to set up 

your fixture where ever you wish without the restrictions of power or 

DMX cabling. The built-in battery will keep charge for up to 6 hours (full 

on) from a full, single charge. This fixture can be used in a stand alone 

mode or connected in a Master/Slave configuration. This wash has five 

operating modes: Sound Active mode, Auto mode, RGB mode, Static 

Color mode, and DMX control mode. 

 

Customer Support: ADJ Products, LLC provides a customer support 

line, to provide set up help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

WIFLY BAR QA5

Summary of Contents for WIFLY BAR QA5

















Reviews: