ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 14
ADJ Products, LLC - www.adj.com - Vortex 1200 User Manual Page 15
Manual Test
- With this function you can manually test
the individual features.
1. Press the MENU button until “Manual Test” is displayed,
press ENTER.
2. Use the UP or DOWN buttons to find the functions that you
wish to test.
3. Once you find a function you wish to test, press the ENTER
button, and the displayed value will begin to flash. You can now
adjust the values by pressing the UP and DOWN buttons. Once
you have finished testing that function press the ENTER button.
4. To exit the manual test mode, press the MENU button.
Auto Test
- This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Fixture Temp.
- With this function you can display the
current temperature of the unit.
1. Press the MENU button until “Fixture Temp.” is displayed,
press ENTER.
2. The current temperature of the fixture will now be displayed.
Press MENU to exit.
Fan Mode
- With this function you can control the fan
operation.
1. Press the MENU button until “Fan Mode” is displayed, press
ENTER.
2. Either “Auto”, “Low”, or “High” will now be displayed. Press
Vortex 1200 System Menu
the UP or DOWN buttons to find your desired operating mode for
the fans.
3. Press ENTER to confirm.
Fixture Time
- With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
Firmware Version
- This will display the software ver-
sion
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
PRO Default
- This function will restore the factory set-
tings.
1. Press the MENU button until “PRO Default” is displayed,
press ENTER.
2. Either “YES” or “NO” will now be displayed. Press the UP or
DOWN buttons to select “YES” to switch back to defualt set-
tings, and press ENTER.
Reset
- Use this function to reset the motors.
1. Tap the MENU button until “Reset” is displayed, press
ENTER.
2. The fixture will now reset the motors.
Vortex 1200 System Menu
