![background image](http://html1.mh-extra.com/html/american-dj/sweeper-beam-quad-led/sweeper-beam-quad-led_user-instructions_2922898007.webp)
ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 13
ADJ Products, LLC - www.adj.com - Sweeper Beam Quad LED User Manual Page 14
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds. To make the display reappear, press and hold
the MENU button for at least 5 secs.
3. Press ENTER to confirm. To make the display reappear, press
and hold the MENU button for at least 5 secs.
DISP
- This will “flip” the LED display 180º.
1. Press the MENU button until “
DISP
” is displayed, press
ENTER.
2. Either “
DISP
” or “
DSIP
” will now be displayed. Press the
ENTER button to “flip” the display.
TILT -
This function activates tilt inversion.
1. Press the MENU button until “
TILT
” is displayed, press
ENTER.
2. The display will show either “
YES”
or
“NO
”. Press the UP
or DOWN buttons to select “
YES
” to activate tilt inversion, or
“
NO
” to deactivate tilt inversion.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
REV -
This function is used in conjuction with DMX
mode. The direction in which the projector lenses/LEDs
light up can be reversed so that the LED line up can start at
either end of the bar. This feature is useful when the unit is
installed in a reversed orientation so the unit itself does not
have to be uninstalled and reversed.
Sweeper Beam Quad LED
System Menu
Sweeper Beam Quad LED
System Menu
Example: When using 35 Channel mode (LED 1) can start at
either end of the bar depending on this functions set up.
1. Press the MENU button until “
REV
” is displayed, press
ENTER.
2. The display will show either “
YES”
or
“NO
”. Press the UP or
DOWN buttons to select “
YES
” which will have the projector
lenses/LEDs light up right to left, or “
NO
” which will have the
projector lenses/LEDs light up left to right.
3. Press ENTER to confirm.
TEST
- This function will run a self test program.
1. Press the MENU button until “
TEST
” is displayed, press
ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the current
temperature of the unit.
1. Press the MENU button until “
TEMP
” is displayed, press
ENTER.
2. The current temperature of the fixture will now be displayed.
Press MENU to exit.
FHRS
- With this function you can display the running
time of the fixture.
1. Press the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.