background image

  Saturn Tri LED™   

                                        Cleaning

  Saturn Tri LED™   

 

                Trouble Shooting

Trouble  Shooting:

  Listed  below  are  a  few  common  problems  that 

you may encounter, with solutions.

No light output from the unit;

1.   Be sure you have connected your unit into a standard 120v wall  
 

 outlet.  

2.  

  Be sure the external fuse has not blown. The fuse is located on  

 

 the bottom panel of the unit. 

3.   Be sure the fuse holder is completely and properly seated. 

 

Unit does not respond to sound;

1.     Low frequencies (bass) should cause the unit to react to sound.
    Tapping on the microphone, quiet or high pitched sounds may
 

 not activate the unit.  

Fixture Cleaning:

 Due to fog residue, smoke, and dust cleaning the 

internal and external optical lenses and mirror should be carried out 

periodically to optimize light output. Cleaning frequency depends on 

the environment in which the fixture operates (I.e. smoke, fog residue, 

dust, dew). In heavy club use we recommend cleaning on a monthly 
basis. Periodic cleaning will ensure longevity, and crisp output.
1.   Use normal glass cleaner and a soft cloth to wipe down the out- 
 

side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.

3.   Clean the external optics and mirror with glass cleaner and a soft  

 

cloth every 20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  
 

30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  
 

back in.

American DJ

®

  -  www.americandj.com  - Saturn Tri LED™ Instruction Manual Page 15

American DJ

®

  -  www.americandj.com  - Saturn Tri LED™ Instruction Manual Page 16

  Saturn Tri LED™                                            Fuse Replacement

First unplug the power. The fuse holder is located next to the power 

cord. Using a flat-head screw driver unscrew the fuse holder. Remove 
the bad fuse and replace with a new one. 

  Saturn Tri LED™                                             UC3 Control

  Channel     Value 

 

       Function

       

1                                                        RED

                       0 - 255                          0% - 100%           
       2                                                      GREEN

        

                                                                               

                 

                       0 - 255                          0% - 100%
       3                                                        BLUE
                       0 - 255                          0% - 100%
       4                                                      STROBE
                       0 - 15                                 OPEN
                     16 - 255             STROBING SLOW - FAST
       5                                                      DIMMER   
                       0 - 255                          0% - 100%

 Saturn Tri LED™   

 

         5 Channel DMX Traits

Stand by

Blackout the unit

Function

1. Synchronous Strobe

2. Four light Strobe
3. Sound Strobe

Chase

Mode

Strobe (LED OFF)

Auto [z4] (LED
ON)

Speed

Summary of Contents for Saturn Tri LED











Reviews: