background image

©

American DJ Supply

®

  -  www.americandj.com  - Pocket Scan™ Instruction Manual Page 15

©

American DJ Supply

®

  -  www.americandj.com  - Pocket Scan™ Instruction Manual Page 16

Fuse  Replacement:  Caution!   Always  disconnect  the  main  power 

before attempting to replace the fuse. Remember always replace with 

the same type lamp and fuse. 

1.  With a flat screwdriver wedge the fuse holder out of the its 

  housing 

2. Remove the old fuse from the holder and replace with the 

    exact same type fuse.

3. Replace the fuse holder in to the fuse holder housing.

4. Reconnect main power.

  Pocket Scan™                           Fuse Replacement

  Pocket Scan™                          Lamp Replacement

Lamp Replacement: Caution! Never open the unit when in use. Always 

disconnect  the  main  power  before  attempting  to  replace  the  lamp. 

Remember always replace with the same type lamp and fuse. 

1.   Be sure to follow the proper procedures when handling 

  halogen bulbs.

2.  Lamp replacement has been made simple by incorporating 

  the use of a removable lamp cover and a thumb screw.

3.  Loosen the thumb screw on front lower cover.

4.  Remove the lamp cover.

5.  Remove and replace the bulb.

6.  Reassemble.

  Pocket Scan™                                          Focusing

1.   To focus the Pocket Scan

TM

 it is best to first turn down the 

  music so the mirror stops moving.

2.  Loosen the thumb screw on the front of the unit that hold 

  the lens in place.

3.  Adjust the focus by moving the lens up and down, until you 

  reach proper focus.

4.  Tighten the thumb screws after you achieve your desired 

  focus.

  Pocket Scan™                                   DMX Settings

DMX CHANNEL

1

2

3

4

PAN

TILT

COLOR

GOBO

DMX512

LEVEL RANGE

0 - 255

99

95

89

85

79

75

69

65

59

55

49

45

39

35

29

25

19

15

9

5

0

255

200

PINK 310

ORANGE 302

YELLOW 603

GREEN 201

BLUE 101

RED304

WHITE

BLACKOUT

LASER

SPEED

SHUTTER

7

6

5

TORQUES 208

CY

AN 104

MAGENTA 507

MAGENTA

 501

ROTATION CW

UV108

YELLOW 601

GREEN 204

ORANGE 306

ROTATION CCW

AUDIO MODE

GOBO 11

ROTATION CW

GOBO 7

GOBO9

GOBO 8

GOBO 10

ROTATION CCW

AUDIO MODE

GOBO 4

GOBO 1

GOBO 3
GOBO 2

GOBO 5

GOBO 6

GOBO 14
GOBO 13
GOBO 12

CLOSED

SLOW STROBE

FAST STROBE

OPEN

AUDIO MODE

UNIT RESET

CLOSED

SLOW STROBE

FAST STROBE

OPEN

RELATIVE

SLOW

FAST

Gobo layout. Note gobo one is Large Spot - Open Shutter.

2

14

13

12

11   

10

9

8

7

6

5

4

3

 Pocket Scan™    

          Halogen Lamp Warning  

This fixture is fitted with halogen lamps which are 

highly susceptible to damage if improperly handled. 

Never  touch  the  lamps  with  your  bare  fingers  as 

the oil from your hands will shorten lamp life. Also, 

never  move  the  fixture  until  the  lamps  have  had 

ample time to cool. Remember, lamps are not cov-

ered under warranty conditions.

Summary of Contents for Pocket Scan











Reviews: