“
S-F
” will equal Master/Send Fast Mode
“
S-S
” will equal Master/Send Slow Mode
4. To toggle between Fast and Slow modes repeat steps one
and two.
Note: The remote control only operates in Stand-Alone or Master-
Slave modes. If the remote is used while the units are in DMX mode,
the remote will not function. If the unit does not receive an active DMX
signal, the unit will automatically react to sound in the Master/Slave
mode.
DMX Mode:
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
American DJ
®
Show Designer™ or the American DJ
®
DMX
Operator.™
2. The Pocket Scan
TM
uses seven DMX channels to operate;
Channel 1 is mirror pan, channel 2 is mirror tilt, channel 3 is
color, channel 4 is gobo, channel 5 is shutter, channel 6 is
speed, and channel 7 controls the laser.
3. To run your fixture in DMX mode, plug in the fixture via the
XLR connections to any standard DMX controller. - Follow the
set-up specifications that come with your DMX controller.
Pocket Scan™ Operation Cont.
Due to fog residue, smoke, and dust cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Pocket Scan™ Cleaning
100
1
10
Pocket Scan™ LCD
Pocket Scan™ Operation Cont.
Adjusting The DMX address:
The DMX address is adjusteded by using the “1, 10, and 100” keys
directly below the LCD. Each press of a button will increase the
selected value of one. Please note that each tap of the keys will only
increase the displayed value, you may decrease the value.
This function will reset all functions to their default setting. You may
reset the fixture by turing the unit on and off. If your units are being
controlled through a DMX controller, you may also reset the fixtures by
adjusting DMX channel seven to a value of 240-250.
This function will automatically shut off the lamp if the shutter is closed
for 10 - 15 minute in DMX mode.
Pocket Scan™ Reset Function
©
American DJ Supply
®
- www.americandj.com - Pocket Scan™ Instruction Manual Page 14
©
American DJ Supply
®
- www.americandj.com - Pocket Scan™ Instruction Manual Page 13
