![background image](http://html1.mh-extra.com/html/american-dj/mobile-beam/mobile-beam_user-instructions_2922803006.webp)
American DJ
®
- www.americandj.com - Matrix Beam LED Instruction Manual Page 11
American DJ
®
- www.americandj.com - Matrix Beam LED Instruction Manual Page 12
SENS -
Sound sensitivity control.
1. Press the MENU button until “
SENS
” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to confirm.
BLND -
Blackout or Stand by mode.
1. Press the either the MENU button until “
BLND
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “
LED
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds. To make the display reappear, press and hold
the MENU button for at least 5 secs.
3. Press ENTER to confirm. To make the display reappear, press
and hold the MENU button for at least 5 secs.
DISP
-
This function will reverse the display 180º.
1. Press the either the MENU button until “
DISP
” is displayed,
press ENTER.
Matrix Beam LED
System Menu
Matrix Beam LED
System Menu
2. Press the UP button to select “
DSIP
” to to invert the display,
or “
DISP
” to leave it normal.
3. Press ENTER to confirm.
TEST
- This function will run a self test program.
1. Press the MENU button until “
TEST
” is displayed, press
ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the unit.
1. Press the either the MENU button until “
FHRS
” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until “
VER
” is displayed,
press ENTER.
2. The display will show the software version.