American DJ Mobile Beam, User Instructions

Page: 5 / 10

American DJ
®
- www.americandj.com - Matrix Beam LED Instruction Manual Page 10 American DJ
®
- www.americandj.com - Matrix Beam LED Instruction Manual Page 9
Matrix Beam LED System Menu
ADDR -
DMX Address Setting .
1. Press the either the MENU, UP, or DOWN buttons until
“ ADDR ” is displayed, press ENTER.
2. “ 1 ” will now be displayed and flashing. Press the UP or
DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let select your desired DMX channel
mode.
1. Press the either the MENU button until “ CHND ” is displayed,
press ENTER. Either “ 1CH ”, “ 4CH ” or “ 25CH ” will be displayed.
2. Press the UP or DOWN buttons to find your desired DMX
channel mode and press ENTER to confim and exit.
SET -
This is the set up for master-slave configuration.
1. Press the either the MENU button until “ SET ” is displayed,
press ENTER. Either “ 1-1 ”, “ 1-2 ” or “ 2-2 ” will be displayed.
“1-1” = stand alone mode.
“1-2” = 2 linked lights in a show mode.
“2-2” = 4 linked lights in a show mode.
2. Press the UP or DOWN buttons to find your desired set up
and press ENTER to confim and exit.
SHND: SH 0 - SH 8
- Show modes 0 - 8. Show mode can
run with or without sound active mode on.
1. Press the MENU button until “ SHND ” is displayed, press ENTER.
2. “ SH X ” will now be displayed, “X” representing a number
between 0-8. Shows 1-8 are preset shows, while “ SH 0 ” is random
show. Press the UP or DOWN buttons to find your desired show.
3. Once you have found your desired show press ENTER, and
then press and hold the MENU button for at least 3 seconds to
confirm.
MANU
- With this function you can manually select either a
number or letter to be displayed.
1. Press the MENU button until “ MANU ” is displayed, press
ENTER. Either “ NUMB ” (Number) or “ LETT ” (Letter) will be dis-
played.
2. Use the UP or DOWN buttons to switch between number
and letter, press ENTER to enter either mode.
3. If you select number, “
PA X ” will now be displayed, “X” rep-
resenting a number between 0-9. Use the UP or DOWN button
to scroll through the numbers and press ENTER when you have
found your desired number.
If you select letter, “
PA X ” will also be displayed, but “X” will rep-
resent a letter from A-Z. Use the UP or DOWN button to scroll
through the letters and press ENTER when you have found your
desired letter.
4. Once you have found your desired letter or number press
ENTER.
SOUN -
Sound Active mode.
1. Press the MENU button until “ SOUN ” is displayed, press
ENTER.
2. The display will show either “
ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to activate sound active mode, or
“ OFF ” to deactivate sound active mode.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to activate.
Matrix Beam LED System Menu