Mega Pixel Arch System Menu
Mega Pixel Arch System Menu
Addr
-
DMX Address Setting
via control board -
1. Tap the MENU button until “
A
ddr” is displayed.
2. Press the ENTER button and the display will automatically set
the DMX Address.
3. Press the MENU button
to return to the main menu
.
AUTO
-
The fixture will automatically find and set a DMX
Address -
1. Tap the MENU button until “
AUTO
” is displayed, press ENTER.
2. “
X
” will now be displayed, “X” represents the displayed address.
Press the UP or DOWN buttons to find your desired address.
3. Press ENTER to confirm, or press the MENU button
to return to
the main menu
.
SLNd -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLNd
” is displayed, press ENTER.
Either “
MAST 1
”, “
SL 1
”, “
SL 2
”, “
SL 3
” or “
SL 4
” will be displayed.
On-Board System Menu.
The Mega Pixel Arch comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or
DOWN buttons until you reach function you wish to change. When you
reach the function you wish to change press the ENTER button
.
When
a function is selected use the
UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button to
confirm. If the
ENTER button
is not pressed within eight seconds the
fixture will automatically return to main menu. To exit without making
any changes press the MENU button.
©
American DJ Supply
®
- www.americandj.com - Mega Pixel Arch Instruction Manual Page 7
©
American DJ Supply
®
- www.americandj.com - Mega Pixel Arch Instruction Manual Page 8
