©
American DJ Supply
®
- www.americandj.com - Mega Pixel Arch Instruction Manual Page 15
Mega Pixel Arch Connecting & Hanging
The unit should be mounted via its screw holes on the bracket.
Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Make sure that the bracer can support
the weight more than 10 times of the unit. And use safety chain
which can hold over 12 times weight of the unit when you fix the
equipment. The equipment must be fixed by professionals. And
it must be fixed at a place where is out of the reach of people.
For a great light show, you can link 4 lights together as below.
Simply connect the units together using the provided screws.
©
American DJ Supply
®
- www.americandj.com - Mega Pixel Arch Instruction Manual Page 16
Mega Pixel Arch Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
Mega Pixel Arch Trouble Shooting
First unplug the power. The fuse holder is located next to the power
inlets. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Mega Pixel Arch Fuse Replacement
