![background image](http://html1.mh-extra.com/html/american-dj/mega-go-flood-par/mega-go-flood-par_user-instructions_2923143007.webp)
ADJ Products, LLC - www.adj.com - Mega Go Flood Par User Manual Page 13
ADJ Products, LLC - www.adj.com - Mega Go Flood Par User Manual Page 14
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2. Connect the first “Slave” unit to the “Master.”
3. Set the “Master” unit to your desired mode of operation. The “Slave”
unit will now follow the “Master”.
Mega Go Flood Par Master-Slave Configuration
Battery Life:
This menu is used to check/display the battery life.
1. Plug the fixture in and press the MODE button until “bXXX” is dis-
played. “XXX” represents a number between 0-100. The number
that is displayed is the remaining battery life. If “b---” is displayed,
it means either the battery is dead or your running the unit on AC
power.
Mega Go Flood Par Operating Instructions
Mega Go Flood Par Operating Instructions
Once you have set your desired color change speed, press the
SET UP button to move on to “F-XX” (color fade). Use the UP or
DOWN buttons to set the color fade speed to “F-00”. This means
the color fade is off, and the fixture will now color change at
the speed you have set. To run the fixture in color fade, reverse
the instructions. Set your color fade speed and set the color
change speed to “SP.01”.
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLXX” is
displayed.
2. There are 35 colors to choose from. Select your desired color by
pressing the UP and DOWN buttons. After you have selected your
desired color you can activate strobing by pressing the SET UP
button to enter the Flash (strobe) mode.
3. “FS.XX” will be displayed, this is Flash mode. The Flash can be
adjusted between “FS.00” (flash off) to “FS.15” (fastest flash).
Auto Run Default:
This will reset the Auto Run mode back to the default settings.
1. Plug the fixture in and press the MODE button until “dXX” is dis-
played. “XX” represents either “on” or “oFF”.
2. Press the SET UP button until “dEFA” is displayed.
3. Press the UP and DOWN buttons simultaneously. Press the
MODE button to exit.
ADJ RFC (Remote Control) On/Off:
This function is used to activate and deactivate the ADJ RFC (Remote
Control). When this function is activated you can control the fixture
using the ADJ RFC. Please see page 15 for the controls and func-
tions.
1. Plug the fixture in and press the MODE button until “dXX” is dis-
played. “XX” represents either “on” or “oFF”.
2. Press the SET UP button until “rFXX” is displayed. “XX” repre-
sents either “on” or “oF”.
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 30 fixtures maximum. After 30 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
NOTE: Fixtures cannot be power cord daisy chained and run by
battery power.
Mega Go Flood Par Power Cord Daisy Chain