©
American DJ
®
- www.Americandj.com - Jelly GO Par64 User Manual Page 15
©
American DJ
®
- www.Americandj.com - Jelly GO Par64 User Manual Page 16
see pages 18-22 for DMX modes, values, and traits.
SOUND ACTIVE -
This button activates sound active mode. Use the
“+” and “-” buttons to scroll through the 15 sound modes. You can
also use the number buttons 1-15 to input your desired sound mode
number. Press the Speed Button and use the “+” & “-” buttons to ad-
just the sound sensitivity. You can also use the number buttons 1-8 to
input the sensitivity level.
SLAVE -
This designates the fixture as a slave fixture in a master/
slave configuration.
SET ADDRESS -
Press this button to set the DMX address. Press
this button first, then press the numbers to set the address.
Example: Set DMX Address 1 Press “S-0-0-1”
Set DMX Address 245 Press “S-2-4-5”
R G B -
Press either one of these buttons and the press the “+” or
“-” to adjust the brightness. You can also use the number buttons to
input your desired intensity.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the
Auto Run, Color Change, Color Fade, sound sensitivity, and RGB in-
tensity.
DMX Control:
Operating through an DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX Mode and address.
1. Before connecting to an DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the “+” or “-” buttons to
scroll through the DMX Channel Modes. Set the mode before you
address the fixture. See the bottom of this page for the DMX
modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the “S” button. When the “S” button is pressed
the LED’s will flash 2-3 times and all the red LED’s will light. Use
the number buttons to press in your desired address. See “SET
ADDRESS” on this page for examples.
Note: When seeting the DMX address each time a number is pressed
Jelly GO Par64 ADJ LED RC Operation
Jelly GO Par64 ADJ LED RC Operation
The
ADJ LED RC
infrared remote
(sold seperately) has many differnet
functions and gives you complete control of your Jelly GO Par64. To
control the your desired fixture you must aim the controller at the
front of the fixture and be no more the 30 feet away. To use the ADJ
LED RC you must first activate the fixtures infrared receiver, to acti-
vate the receiver please see the instructions on page 13.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button activates Auto Run. Use the “+” and “-” but-
tons to scroll through the 16 auto run programs. You can also use
the number buttons 1-16 to input your desired auto run program. The
Auto Run programs can be run as color change or color fade pro-
grams. Please see the Auto Run section on page 11 for more details.
To control the speed of the Auto Run press the Speed Button and
use the “+” & “-” buttons to adjust the running speed.
To control the fade speed of the Auto Run press the Flash Button and
use the “+” & “-” buttons to adjust the fade speed. The number but-
tons can also be used to adjust the fade speed and auto run speed.
SELECT PROGRAM (Static Color Mode)
-
This button activates
static color mode. Use the “+” and “-” buttons to scroll through the 32
static colors. You can also use the number buttons 1-32 to input your
desired static color number.
Press the Flash Button to activate strobing and use the “+” & “-” but-
tons to adjust the strobe speed. You can also use the number buttons
0-15 to input the strobe speed.
FLASH
-
This button will activate the strobe effect. You can control
the flash rate by pressing the “+” and “-” buttons. Press this button
again to exit strobe mode. This mode works with Static Color Mode
and RGB mode.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the
speed of the Auto run, Color Fade, & Color Change. This button will
also control the sound sensitivity adjustment in Sound Active Mode.
DMX MODE -
This button will let you select which DMX mode you
want to use. Some fixtures will come with different DMX channel
modes. This button will switch between the different modes. Please
