©
American DJ Supply
®
- www.americandj.com - Inno Color Beam 12 User Manual Page 14
©
American DJ Supply
®
- www.americandj.com - Inno Color Beam 12 User Manual Page 13
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs. The Inno Color Beam 12
has 2 DMX channel modes; a 9 Channel Mode & 16 Channel Mode.
To select your channel mode see page 8.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™ See
pages 14-16 for the DMX modes & traits.
2. To run your fixture in DMX mode, select your desired channel
mode and then set your desired DMX address following the
directions on page 8, and the set-up specifications that come
with your DMX controller.
3. Plug in the fixture via the XLR connections to any standard DMX
controller.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
Inno Color Beam 12 Universal DMX Control
Master-Slave Configuration:
This function will allow you to link up
to 16 units together and operate without a controller. The units will be
sound activated. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units programs.
Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired operating mode.
3. On the slave units tap the MENU button until “Slave Mode” is dis-
played, and Press ENTER. Choose either “Slave 1” or “Slave 2”
and press ENTER. See page 9 for more info.
4. The slave units will now follow the Master unit.
Inno Color Beam 12 Master-Slave Configuration
Channel Value
Function
1 0 - 255 PAN 0° - 540°
2 0 - 255 TILT 0° - 270°
3 SHUTTER/STROBING
0 - 7 BLACKOUT
8 - 15 OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 OPEN
140 - 181 SLOW OPEN - FAST CLOSE
182 - 189 OPEN
190 - 231 SLOW CLOSE - FAST OPEN
232 - 239 OPEN
240 - 247 RANDOM STROBE
248 - 255 OPEN
4 RED
0 - 255 0% - 100%
5 GREEN
0 - 255 0% - 100%
6 BLUE
0 - 255 0% - 100%
7 WHITE
0 - 255 0% - 100%
8 MASTER DIMMER
0 - 255 0% - 100%
9 SPECIAL FUNCTIONS
0 - 69 NO FUNCTION
70 - 79 ENABLE BLACKOUT WHILE PAN OR
TILT MOVEMENT
80 - 89 DISABLE BLACKOUT WHILE PAN OR
TILT MOVEMENT
90 - 199 NO FUNCTION
200 - 209 RESET
210 - 239 NO FUNCTION
240 - 255 SOUND ACTIVE
Inno Color Beam 12 9 Channel Mode
