American DJ Inno Color Beam 12, User Instructions

Page: 6 / 10

©
American DJ Supply
®
- www.americandj.com - Inno Color Beam 12 User Manual Page 12
©
American DJ Supply
®
- www.americandj.com - Inno Color Beam 12 User Manual Page 11
2. When “ DISP ” is displayed the LED display will remain normal,
when “ DSIP ” is displayed, the LED display will be “flipped”.
Press the ENTER button to set your desired .
BALA
- With this function you are able to adjust the RGB
colors to create your desired shade of white.
1. Press the MENU button until “ BALA ” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the RGB
colors. Once you have found your desired color you would like
to adjust press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the intensity of the color. Continue to adjust the
RGB colors until you have reached your desired shade of white.
MANU
- In this submenu you are able to test the different
functions; pan, tilt, LEDs, dimmer, and strobe.
1. Press the MENU button until “ MANU ” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Tap the MENU button until “ TEST ” is displayed, press ENTER.
2. The fixture will now run a self test.
TEDT
- With this function you can check the LED tempera-
ture.
1. Tap the MENU button until “ TEDT ” is displayed, press ENTER.
2. The LED temperature will now be displayed. Press MENU to
exit.
CPUT
- With this function you can check the temperature of
the fixture.
1. Tap the MENU button until “ CPUT ” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press
MENU to exit.
FHRS
- With this function you can display the running time
of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- This will display the software version
1. Press the MENU button until “ VER ” is displayed. Press the
ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “ RSET ” is displayed, press ENTER.
2. The fixture will now reset,
Inno Color Beam 12 System Menu Inno Color Beam 12 System Menu