background image

©

American DJ Supply

®

  -  www.americandj.com  - Inno Color Beam 12 User Manual Page 19

  

SPECIFICATIONS:

   Voltage:    

 

120V~240V  50Hz/60Hz

   LEDs: 

 

 

12 x 3W Cree LEDs (3 Red, 

   

 

 

 

3 Green, & 3 Blue)

  Power Consumption: 

53W

  Beam Angle: 

 

15 Degrees

 

Fuse:   7Amp

  Weight:     

 

12lbs./ 5Kgs.

   Dimensions: 

 

9” (L) x 8.75” (W) x 12” (H)

   

 

 

 

224 x 219 x 302mm

   Colors: 

 

 

RGB Color Mixing

   DMX Channels:   

2 DMX Channel Modes: 9 or 16    

 

 

   Channels

  Working Position:   

Any safe working position

  Warranty:                         3 Year (1095 days)

Please Note: Specifications and improvements in the design of 

this unit and this manual are subject to change without any prior 

written notice.

Auto Sensing Voltage:

 This fixture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the 

power source.

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

  Inno Color Beam 12                                    Specifications

  Inno Color Beam 12                                             Warranty

MANUFACTURER’S LIMITED WARRANTY

A.  

American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American 

Audio products to be free of manufacturing defects in material and workmanship for a prescribed 

period from the date of purchase (see specific warranty period on reverse). This warranty shall be 

valid only if the product is purchased within the United States of America, including possessions and 

territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable 

evidence, at the time service is sought. 
B. 

For warranty service you must obtain a Return Authorization number (RA#) before sending 

back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send the product 

only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the requested repairs or 

service (including parts replacement) are within the terms of this warranty, American DJ, Inc. will pay 

return shipping charges only to a designated point within the United States. If the entire instrument is 

sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If 

any accessories are shipped with the product, American DJ, Inc. shall have no liability whatsoever for 

loss of or damage to any such accessories, nor for the safe return thereof.  
C.  

This warranty is void if the serial number has been altered or removed; if the product is 

modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability of 

the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. 

factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the product 

is damaged because not properly maintained as set forth in the instruction manual. 
D. 

This is not a service contract, and this warranty does not include maintenance, cleaning or 

periodic check-up. During the period specified above, American DJ, Inc. will replace defective parts 

at its expense with new or refurbished parts, and will absorb all expenses for warranty service and 

repair labor by reason of defects in material or workmanship.  The sole responsibility of American DJ, 

Inc. under this warranty shall be limited to the repair of the product, or replacement thereof, including 

parts, at the sole discretion of American DJ.  All products covered by this warranty were manufactured 

after January 1, 1990, and bear identifying marks to that effect. 
E. 

American DJ, Inc. reserves the right to make changes in design and/or improvements upon 

its products without any obligation to include these changes in any products theretofore manufac-

tured. No warranty, whether expressed or implied, is given or made with respect to any accessory 

supplied with products described above. Except to the extent prohibited by applicable law, all implied 

warranties made by American DJ, Inc. in connection with this product, including warranties of mer-

chantability or fitness, are limited in duration to the warranty period set forth above. And no warran-

ties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to 

this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such 

repair or replacement as is expressly provided above; and under no circumstances shall American DJ, 

Inc. be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to 

use, this product.  
This warranty is the only written warranty applicable to American DJ and American Audio  

Products and supersedes all prior warranties and written descriptions of warranty terms and 

conditions heretofore published. 
MANUFACTURER’S LIMITED WARRANTY PERIODS:

• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Amplifiers) 

• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty

• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty (Such 

as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, 

Mirror Balls, Par  Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps, and Star Tec 

Series) 

• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty

• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors, PCB boards, 

and power supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 

day limited warranty).

Summary of Contents for Inno Color Beam 12











Reviews: